Products: Fixed knot wire mesh fence is made of hot dipped galvanized wire, Outer and inner wire diameter is different, and outside wire with high tesile strength. This knot acts as a hinge that gives under pressure, then springs back into shape. This provides easy installation because the hinge "gives" while retaining full height for continuing protection and good looks. Vertical wires are individually cut and wrapped for maximum strength and flexibility.
Materials: hot-dipped galvanized wire, which made of Q235 iron wire.
Surface treatment:Class A: Hot dipped galvanized hinge joint field fence(zinc coated:220-260g/m²)
Class B: Hot dipped galvanized hinge joint field fence(zinc coated:60-70g/m²)
Class C: Electro galvanized hinge joint field fence(zinc coated:15-20g/m²)
Technical parameters:Wire diameter and tensile strength:
horizontal wires: diameter 2,00 mm, tensile strength 1100N
vertical wires: diameter 2,00 mm, tensile strength 500N
Edge wires: diameter 2,50 mm, tensile strength 1200N
Height | Wire diameter | Vertical wire spacing | Horizontal wire spacing |
1.2m | 2.0mm | 150mm | 7"×2+6"+5"×2+4"×2+3"×3 |
1.5m | 2.0mm | 150mm | 7"×2+6"×2+5"×2+4"×2+3"×5 |
1.8m | 2.0mm | 150mm | 7"×2+6"×3+5"×2+4"×2+3"×7 |
PACKING: About the packing of the fixed knot wire mesh fence, normally each roll to be wrapped with plastic film and then bulk in container but if the quantity is small or worker cost higher area, we will advice except the shrink film packing and pallet packing.

