CuNi (MWS-30/MWS-180) Resisitance Heating Alloy wire

Model NO.
CuNi
Size
0.01-3mm*0.3-600mm
surface
Bright
standard
GB/ASTM/JIS/BIS/DIN
Sample
Sample Available
Serves
Small Order Accepted
Transport Package
Packing in Coil Cartons, Pallet, Spools, Coils
Specification
0.001mm~3mm*5mm~250mm
Trademark
TANKII
Origin
China
HS Code
74082200
Production Capacity
2000tons/Year
Reference Price
$ 16.20 - 31.50
Contact Us

Product Description

CuNi (MWS-30/MWS-180) Resisitance Heating Alloy wire

Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44 in form of strip/heet/plate/falt wire/ribbon

As a big manufacturer and exporter in China on the line of electric resistance alloy, we can supply all kinds of electric resistance alloy wire and strips (resistance steel wire and strips),
General Description
Due to has high tensile strength and increased resistivity values, TANKII copper nickel alloy wires are the first choice for applications as resistance wires. With the different nickel amount in this product range, the characteristics of the wire can be chosen according to your requirements. Copper nickel alloy wires are available as bare wire, or enamelled wire with any insulation and self-bonding enamel. Furthermore, litz wire made of enamelled copper nickel alloy wire are available.
Features
1. Higher resistance than copper
2. High tensile strength
3. Good bending proof performance
Application
1. Heating applications
2. Resistance wire
3. Applications with high mechanical requirements
 
Characteristic Resistivity ( 200C μΩ.m) Max.working Temperature ( 0C) Tensile Strength (Mpa) Melting point (0C) Density ( g/cm3) TCR x10-6/ 0C (20~600 0C) EMF vs Cu (μV/ 0C) (0~100 0C)
Alloy Nomenclature
NC020(CuNi14) 0.2 300 ≥310 1115 8.9 <30 -28

 Copper Nickel Resistance Alloy-CuNi10
Chemical Content, %
Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
10 0.3 - - Bal - ND ND ND ND
 
Mechanical Properties
Max Continuous Service Temp 250ºC
Resisivity at 20ºC 0.15±5%ohm mm2/m
Density 8.9 g/cm3
Thermal Conductivity 50 (Max)
Melting Point 1100ºC
Tensile Strength,N/mm2   Annealed,Soft 210~370 Mpa
Tensile Strength,N/mm2   Cold Rolled 420~740 Mpa
Elongation(anneal) 25%(Min)
Elongation(cold rolled) 2% (Min)
EMF vs Cu, μV/ºC (0~100ºC) -25
Micrographic Structure austenite
Magnetic Property Non
 
Application of CuNi10
CuNi10 low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
CuNi (MWS-30/MWS-180) Resisitance Heating Alloy wire
CuNi (MWS-30/MWS-180) Resisitance Heating Alloy wire


 

 

Alloy

CHANHXETAI.VN, 2023