Hau Wei Eg8010 Hg8310m Gpon 1ge О & Ncy ; У

GPON ONT HG8010H Optical Network Terminal 

GPON ONT, 1*GE port

Without WiFi

Compatible with Huawei OLT that supports OMCI

Connector type SC/UPC

Coming with B+ or C+ Module

Can be configured by OLT or Web or NMS

HG8010H coming with English GUI

Suitable for home and SOHO users

Packing dimension : 200*140*80mm

Gross Weight : 0.5kg

GPON ONT HG8010H optical network terminal (ONT) is a indoor optical network terminal in FTTx solution. By using GPON technology, ultra-broadband access is provided for home and SOHO users. The HG8010H provides one 10/100/1000M Base-T Ethernet port for connecting to a home gateway. The home gateway then can be connected to a PC, Mobile Terminal, STB, or Video phone to provide high-speed data, video services and WiFi.

AC   Output   Current   Feedback
Pin   IFB   measures   the   output   load   current   for   overcurrent   protection   detection . As   the   current sampling   and   feedback   circuit   shown   in   figure  8. 1 a , pin   IFB ' s   reference   peak   voltage   is  0.5 V   and overcurrent   detection   time   is  600 mS . If   current   is   higher   than   inverter ' s   lad   current   by   some   reason ,  EG 8 0 10 will   set   the   electrical   level   of   SPWMOUT 1 to   SPWMOUT 4 at  "0" or  "1" and   shut   down   all power   MOSFET   to   decrease   the   voltage   to   zero   depending   on   pin   (9) PWMTYP ' s    setting .   This function   mainly   protects   power   MOSFET   and   the   load . Sixteen   seconds   after   overcurrent   protection activates ,   EG 8010   will    turn    on    power    MOSFET    for   100 ms    to    re - determine    load    current .   If overcurrent   issue   still   exists , EG 8010 will   repeat   the   process   above   every   sixteen   seconds. If EG8010 runs   regularly   for   more   than   one   minute , it   will   zero   the   counter   of   overcurrent . However , if   EG 8010