Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage

Model NO.
NDX100-80-200
Impeller Number
Single-Stage Pump
Working Pressure
Low Pressure Pump
Influent Type of Impeller
Single Suction Pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Rear Opening Type Structure
Mounting Height
Since Irrigation Centrifugal Pumps
Impeller
Closed
Usage
Pump, Pumps
Medium Temperature
-10-85 Celsius Degree
Product Standards
DIN24255
Application
Factories,Mines,Urban Water Supply and Drainage
Sealing Type
Mechanical Seal
Normal Speed
1450rpm/2900rpm
Merge2
Wuxi Pump Works
Merge
Changsha Swan
OEM/ODM
Accept
Pump Warranty
One Year
Transport Package
Export Plywood Case
Trademark
LEO
Origin
China
HS Code
8413709990
Production Capacity
3000set/Year
Package size per unit product
1248.00cm * 1060.00cm * 700.00cm
Gross weight per unit product
70.000kg
Reference Price
$ 900.00 - 9,000.00
Contact Us

Product Description

Overview
T ype NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles.
Th is series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control.
Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller
The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance
The pump is suitable for pumping medium at temperature of -10~85 ºC  and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering

Performance Parameters
Model Capacity (m³/h) Head (m) Pump efficiency  (%) Shaft power  (kW) Speed (rpm) Impeller outer diameter (mm) Inlet caliber (mm) Onlet caliber (mm) Motor Power (kW) Weight (kg)
NDX100-80-200 115 62 72 26.99 2900 214 100 80 45kW 70
190 55 80.3 35.5
225 49 78 38.5

Table Product Attribute
Attribute Attribute Attribute value
Material Impeller HT250
Pump body HT250
Pump shaft 2Cr13
Suspension HT250
Seal ring HT250
Machinery Seal Vulcan
Coupling Elastic pin
Antifriction bearing NSK
Working conditions Medium temperature(ºC) ≤85ºC
Ambient temperature(ºC) 40
Design pressure(MPa) 1.6
Installation Inlet diameter(mm) 100
outlet diameter(mm) 80
Direction of rotation Viewed from the transmission end, rotate clockwise
Entrance orientation Axial suction
Exit orientation Vertical up
Motor Number of motor phases 3
Motor power safety factor 1.2
Protection class IP54
Insulation class F
Motor power(kW) 45kW
Motor model YE2-225M-2
Power frequency(Hz) 50
Energy efficiency rating IE3
Package Weight(kg) 70

Product Features
Energy efficient :   Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level.
Rear opening type structure : The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance
Quality assurance : Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life.
Product orientation : Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.

Structural Features
Pump casing: Footing support structures,base support structure.The pump intakes axially and discharges from the top end.The spiral volute can bear up to 2.5Mpa of pressure.The flanges at the inlet and outlet can be drilled according to the metric system or the American system
Impeller: The closed impeller adopts excellent hydraulic model design to ensure the performance and efficiency of the pump.The impellers are 100% tested by dynamic balance test to reduce the vibration of the pump
Pump shaft: The pump is equipped with SS420 stainless steel shaft,which has wide versatility.There are more than 60 specifications in the whole series,while only six kinds of shafts are used.The same specifications of shafts,bearding,shaft sleeves,shaft seals and impeller fasteners can be interchanged
Shaft seal : It adopts high quality mechanical seals from well know domestic manufactures,the seals have long service life and no leakage,and can be equipped with auxiliary systems such as flushing and cooling
Bearing: It is imported NSK bearing that ensure a longer service life.The double closed,maintenance free bearding eliminates the need for separate lubricants,saving the time for maintenance.
Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage
Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage Industrial Electric Horizontal Single Stage End Suction Centrifugal Water Pump for Water Supply and Drainage

FAQ
1. Q:Are you a manufacturer or trading company  
A:We are a manufacturer that specializes in industrial pump for 60 years
 
2. Q:What payment term do you prefer?
  A:Normally we take payment term 30% T/T in advance,70% paid before shipment, we can also accept L/C at sight.
 
3. Q:What about the package?
A: Standard export plywood case
 
4. Q:How long is the warranty?
A: Eighteen (18) months after delivery, twelve (12) Months from the date of commissioning, whichever comes earlier
 
5. Q:Is it acceptable to make customer's own brand?
 A:  Sure, we can do OEM & ODM
 
6. Q:How many days does it take for manufacturing?
 A:  It depends on order quantity and pump types. Normally it takes 20-120 days

 

 

Centrifugal Pump

SUPERAUTO.CAT, 2023