Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate

Model NO.
D360-40X8
Driving Type
Motor
Impeller Number
Multistage Pump
Working Pressure
High Pressure Pump
Influent Type of Impeller
Single Suction Pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Since Irrigation Centrifugal Pumps
Impeller
Closed
Usage
Pump, Pumps
Inlet Working Pressure
Below 0.6MPa
OEM/ODM
Accept
Working Temperature
0-80 Celsius
Merge2
Wuxi Pump Works
Merge
Changsha Swan
Transport Package
Export Plywood Case
Trademark
LEO
Origin
China
HS Code
8413709990
Production Capacity
3000set/Year
Package size per unit product
6057.00cm * 1400.00cm * 1210.00cm
Gross weight per unit product
4120.000kg
Reference Price
$ 1,800.00 - 18,000.00
Contact Us

Product Description

Introduction
D type pumps are single suction multistage segmental centrifugal pumps which adopt energy efficient hydraulic model,with wide performance range,high efficiency,reasonable structure,safe and steady operation,low noise,long life performance and easy installation and maintenance.

Application
D type pump apply to mining,factory and city water supply and drain,and are used for transporting clear water without solid particles, abrader and suspended substance or other liquids that their physical and chemical properties are similar to clear water

Performance Parameters Table
Model Flow (m³/h) Head (m) Pump efficiency (%) Shaft power  (kW) Speed (rpm) Impeller outer diameter (mm) Stage
D360-40X8 360 320 80 392.4 1480 360 8

Product Attribute
Attribute Attribute Attribute value
Performance Speed 1480
Material Impeller HT250
Pump shaft 40Cr
Bearing SKF
Pump casing HT250
Working conditions Medium temperatur ( ºC ) Below 80 ºC
Installation Inlet diameter (mm) DN200
Outlet diameter (mm) DN200
Direction of rotation Clockwise
Entrance orientation Side entry
Exit orientation Vertical up
Instructions Low pressure male bottom
Motor Number of motor phases 3
Protection class IP54
Insulation class F
Motor Power (kW) 500
Motor model YXKK-400-4
Power frequency (Hz) 50
Rated voltage (V) 6000
Seal Sealed form Machinery Seal

Structural characteristics
The pump series is installed horizontally,the inlet is horizontal and the outlet is upward,they can be changed as required.the pump consists of pump body,rotor,balanced construction,bearing and seal
Pump body:suction casing,stage casing,discharge casing and diffuser are linked by bolts to form a working house
Rotor:it consists of shaft,impeller,shaft sleeve,balance disk etc,the spare parts of shaft are rolled into one by straight supported by bearing at both ends keys and sleeve nuts,the rotor is in pump casing
Balanced construction:it consists of gimbals,balancing sleeve,balanced pipeline
Parts of bearing:they consist of shaft box,bearing and bearing cover.except 600-80,800-80 type pump adopt sliding bearing and oil lubrication,other pumps adopt rolling bearing and grease lubrication
Sealing parts usually adopt packing seal,mechanical seal as well
Drive: pump is driven directly by motor through flexible coupling,viewed from the motor end, the rotating direction of pump is clockwise.

Ordering instructions
The necessary parameters: Pump type or capacity, head at required operating point,suction pressure,density,temperature,viscosity and causticity of pumped medium etc,type of shaft sealing,motor power,voltage,insulation class,level of protection,cooling system.
Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate
Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate Electric High Pressure Single Suction Multistage Centrifugal Water Pump with SGS Certificate

FAQ
1. Q:Are you a manufacturer or trading company  
A:We are a manufacturer that specializes in industrial pump for 60 years
 
2. Q:What payment term do you prefer?
  A:Normally we take payment term 30% T/T in advance,70% paid before shipment, we can also accept L/C at sight.
 
3. Q:What about the package?
A: Standard export plywood case
 
4. Q:How long is the warranty?
A: Eighteen (18) months after delivery, twelve (12) Months from the date of commissioning, whichever comes earlier
 
5. Q:Is it acceptable to make customer's own brand?
 A:  Sure, we can do OEM & ODM
 
6. Q:How many days does it take for manufacturing?
 A:  It depends on order quantity and pump types. Normally it takes 20-120 days
 
 

 

Centrifugal Pump

SUPERAUTO.CAT, 2023