| Model | LW-6 | LW-7 | LW-8 | LW-9 | |
| Specification | Metric | Metric | Metric | Metric | |
| Tractor HP | 25-30HP | 30-45HP | 45-60HP | 70-100HP | |
| 3-point Linkage | Cat-1 | Cat-1 | CAT-1&2 | CAT-2 | |
| Structure Weight(kg) | 480 | 500 | 580 | 620 | |
| A | Digging Depth(two foot flat bottom)/mm | 1750 | 1950 | 2250 | 2550 |
| B | Reach from center line of Swing pivot(mm) | 2600 | 2900 | 3200 | 3600 |
| C | Loading Height(bucket at 60°) /mm | 1720 | 1840 | 1930 | 2210 |
| D | Transport Height(maximum)/mm | 1840 | 2060 | 2130 | 2480 |
| E | Extend Height(mm) | 2870 | 3110 | 3240 | 3590 |
| F | Loading Reach(bucket at 60°)/ mm | 950 | 1180 | 1140 | 1360 |
| G | Transport Overhang(mm) | 1080 | 1110 | 1220 | 1270 |
| H | Undercut(mm) | 730 | 830 | 870 | 920 |
| I | Bucket Rotation(°) | 180 | 180 | 180 | 180 |
| J | Stabilizer Spread(up position)/mm | 1310 | 1310 | 1310 | 1310 |
| K | Stabilizer Spread(down position)/mm | 2100 | 2100 | 2340 | 2340 |
| L | Swing Arc(°) | 180 | 180 | 180 | 180 |
| M | Bucket width(mm) | 300 | 400 | 450 | 500 |
| N | Bucket cubage(m³) | 0.036 | 0.045 | 0.052 | 0.06 |



| Main Technical Data of TH-404/454/504/554/604 Tractor | ||
| Tractor parameters | Model NO | TH-404/454/504/554/604 |
| Type | 4 x 4 wheeled drive | |
| L x W x H(mm) | 3450 x 1530 x 1930 | |
| Wheel base(mm) | 1775 | |
| Front wheel tread(mm) | 1000,1100,1200(step adjustable) | |
| Rear wheel tread(mm) | 960-1300(stepless adjustable) | |
| Min ground clearance | 320mm | |
| Dry mass(kg) | 1400 | |
| Clutch | Dry type single action clutch | |
| Steering | hydraulic steering | |
| Transmission box | 8F + 2R Shifts | |
| Engine data | Engine brand | LD/QC/XC (Optional) |
| Engine model | Four-cylinder engine | |
| Engine type | Inline,cooled water,four stroke | |
| Engine Rated power | 29.5/33.1/36.7/40.4/44.1kw | |
| Engine Rated speed | 2300(r/min) | |
| Fuel | diesel | |
| Tyre | Front Tyre | 6.5-16 |
| Rear Tyre | 11.2--24 | |
| PTO | Suspension type | Rear three point suspension category 0 or I |
| Pto speed | Dual-speed 540/720 or 720/1000r/min | |
| Pto shift & spine size | I35 Rectangle Spline with 6 teeth | |
| Lifting force(N) | 7650 | |
| Certification | ISO.CCC,CE | |


