W1a-2 Modifier Plastic Modifier Toughening Agent

Model NO.
W1A-2
Specification
20 KGs per bag
Trademark
Colebond
Origin
China
HS Code
3901909000
Production Capacity
20000 Tons Per Year
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

Product description
 
W1A-2 is a grafted polymer of MAH, with polyolefin elastomer as the base material, with extremely low glass transition temperature characteristics and white and transparent particle appearance.
 
Performance Numerical value Testing method
Density 0.87 g/cm³ ASTM D792
Melt flow rate  (190°C/2.16kg) 0.3-1.0 g/10min ASTM D1238
MAH content High Colebond Method 1
Moisture ≤0.3 % Halogen Rapid Moisture Determination
Typical application Polyolefin Alloy Compatibilizer
PA reinforced filling, ultra-low temperature toughening PA
NOTE: The above data are typical test values and should not be interpreted as a specification low < 0.4wt %, medium 0.4-0.8 wt%, high > 0.8wt%.

Packaging and storage:
 
20KG kraft paper bag with internal plastic bag, This product shall be treated as non-hazardous article and be stored or transported under dry conditions, avoid sunlight and rain.

The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.
 
Other POE-g-MAH series List:
Brand number
  		Melt index
190ºC 2.16kg
g/min 		Grafting ratio
  		Density
g/cm² 		Characteristic
 
W1A 0.3-1.0 High 0.87 PA reinforced filling, u ltra-low temperature toughening.
W1A-2 0.3-1.0 High 0.87 PA reinforced filling, u ltra-low temperature toughening.
W1A-4 0.1-1.0 High 0.87 PA reinforced filling, u ltra-low temperature toughening.
W1A-6 >0.1 High 0.89 PA reinforced filling, l ow temperature toughening .
W1A-F 5-14 High 0.87 PA reinforced filling, TPE encapsulated
W1B 0.3-2.0 High 0.87 PA reinforced filling, u ltra-low temperature toughening.
W1 0.2-1.0 High 0.88 PA reinforced filling, l ow temperature toughening.
W1C 0.3-1.5 Medium 0.88 PA reinforced filling, l ow temperature toughening.
W1D 0.6-2.0 High 0.88 PA reinforced filling, l ow temperature toughening.
W1F 10-24 High 0.87 PA reinforced filling, h igh dispersion .
Note: The above data are typical values tested and should not be construed as specifications
Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %.



Application display

W1a-2 Modifier Plastic Modifier Toughening Agent

Company profile
Coace Chemical Company Limited is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
W1a-2 Modifier Plastic Modifier Toughening Agent

Our factory


W1a-2 Modifier Plastic Modifier Toughening Agent
W1a-2 Modifier Plastic Modifier Toughening Agent W1a-2 Modifier Plastic Modifier Toughening Agent W1a-2 Modifier Plastic Modifier Toughening Agent

Our certifications

W1a-2 Modifier Plastic Modifier Toughening Agent

Exhibitions

W1a-2 Modifier Plastic Modifier Toughening Agent Our advantages

1.Research & Development strength.
2.Quality assurance.
3.Product customized.
4.Lower costs and more convenient cross-boarder trader.
5.Delivery on time and global service.
 
 
-

 

Plastic Auxiliary Agent

SUPERAUTO.CAT, 2023