Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer

Model NO.
KS-05
Specification
20 KGs per bag
Origin
China
HS Code
3901909000
Production Capacity
20000 Tons Per Year
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

Product Description

Characteristic:  W1H is a general-purpose HDPE-G-MAH product with excellent comprehensive properties. It contains maleic anhydride and has strong plasticity, which can improve the properties of polymerization and matrix minerals, and the surface roughness of inorganic substances, reaching The effect of enhancing the strength of composite materials.
 
Product Model W1 H
Appearance White or light yellow even granules
Melt Index(190 °C ,2.16Kg):g/10min 1.0-4.0
Grafting Ratio High
Application
1. Can be used as a compatibilizer for low-smoke halogen-free flame retardant cable materials;
2. It can be used as a surface improver for extruded sheets/plates, which can effectively improve the surface flatness of the material and eliminate the unevenness and pitting on the surface of the material;
3. It can be used as a compatibilizer for polyethylene and glass fiber to promote the compatibility of polyethylene and glass fiber;
4. It can be used as a compatibilizer for masterbatches with PE as a carrier, such as color masterbatches, flame retardant masterbatches, functional masterbatches, etc.;
5. It can be used as a modifier for extending the anti-fog period of anti-fog mulch.

Application effect of W1H in glass fiber (30%) reinforced HDPE: Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer
Effect of W1H on Tensile and Bending        
Effect of W1H on Impact Properties Properties of HDPE+30% GF Composite System of HDPE+30% GF Composite System
 
Note: HDPE raw material uses DOW K T 10 0 0, glass fiber uses Jushi 98 8 A

It can be seen from the figure that in the 30% glass fiber reinforced HDPE system, adding 5% Colebond ®W1H can greatly improve the tensile strength, bending strength and notched impact strength of the material system, and the coupling effect is remarkable.

Recommended dosage:

3-10%, It can be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.

Pack ag ing and Storage:

20KG kraft paper bag with internal plastic bag, This product shall be treated as non-hazardous article and be stored or transported under dry conditions, avoid sunlight and rain.

Other PE-g-MAH series List:
 
Brand number
  		Melt index
190ºC 2.16kg
g/min 		Grafting ratio
  		Characteristic
 
W1 H 1.0-4.0 High W ood -P lastic composite
W1 L 0 .5-2.0 High Low-smoke halogen-free flame retardant cable material, adhesive resin.
W1 L-1 1.0-3.5 High Modified asphalt, toughened PA.
W1 L-2 0.5-3.0 High Low-smoke halogen-free flame retardant cable materia l.
W1 L-B 6.0-8.0 High Mineral filled, starch filled.

Note: The above data are typical values tested and should not be construed as specifications
Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %.

Application display

Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer

Company profile
Coace Chemical Company Limited is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer

Our factory


Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer
Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer

Our certifications

Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer

Exhibitions

Polyester Alloy Compatibilizer PLA and Pbat Alloy Compatibilizer Our advantages

1.Research & Development strength.
2.Quality assurance.
3.Product customized.
4.Lower costs and more convenient cross-boarder trader.
5.Delivery on time and global service.
 
 
-

 

Plastic Auxiliary Agent

SUPERAUTO.CAT, 2023