Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules

Model NO.
W1F
Specification
20 KGs per bag
Trademark
Colebond
Origin
China
HS Code
3901909000
Production Capacity
20000 Tons Per Year
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

Characteristic:   This product is a MAH functionalized polyolefin elastomer with high flow properties that promotes separation of glass fibers   scattered, reducing the impact on MI.
 
Product Model W1F
Appearance White even granules
Melt Index(190°C,2.16Kg):g/10min 10-24
Grafting Ratio High
Density(g/cm3) 0.87
Application
1.Be used for PA6 or PA66 compatibilizing or toughening. Increase the impact resistance and processability of nylon, decrease the water absorption, greatly improve the cold-resistance.
2.Be used for the compatibilizer of nylon and polypropylene/polyethylene alloy.
3.Be used for the macromolecular modifier(coupling agent) of mineral filled or glass-fiber filled nylon.

Comparison parameters of different applications :
 
Typical Data of Apply on T hermally C onductive N ylon
Formula 1#(%) 2#(%)
PA6-YH400 40 34
GF-988A 15 15
magnesium hydroxide 45 45
W1F 0 6
 
Physical properties unit 1# 2#
1/16vertical flame retardant Level
  		V0 V0
Tensile Strength Mpa 95 87
Flexural Strength Mpa 125 120
Izod notched impact strength J/m 30 70
Note: The data above are all experimental typical values, only for reference .

The above figure shows the addition of W1F can effectively improve the dispersion of inorganic fillers in nylon, improve the flexibility of the product, and not become brittle.

Recommended dosage:
The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.

Pack ag ing and Storage:
20KG kraft paper bag with internal plastic bag, This product shall be treated as non-hazardous article and be stored or transported under dry conditions, avoid sunlight and rain.

Other POE-g-MAH series List:
 
Brand number
  		Melt index
190ºC 2.16kg
g/min 		Grafting ratio
  		Density
g/cm² 		Characteristic
 
W1A 0.3-1.0 High 0.87 PA reinforced filling, ultra-low temperature toughening.
W1A-2 0.3-1.0 High 0.87 PA reinforced filling, ultra-low temperature toughening.
W1A-4 0.1-1.0 High 0.87 PA reinforced filling, ultra-low temperature toughening.
W1A-6 >0.1 High 0.89 PA reinforced filling, l ow temperature toughening.
W1A-F 5-14 High 0.87 PA reinforced filling, TPE encapsulated
W1B 0.3-2.0 High 0.87 PA reinforced filling, ultra-low temperature toughening.
W1 0.2-1.0 High 0.88 PA reinforced filling, low temperature toughening.
W1C 0.3-1.5 Medium 0.88 PA reinforced filling, low temperature toughening.
W1D 0.6-2.0 High 0.88 PA reinforced filling, low temperature toughening.
W1F 10-24 High 0.87 PA reinforced filling, h igh dispersion.
Note: The above data are typical values tested and should not be construed as specifications
Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %.
 
Application display
Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules

Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules

Company profile
Coace Chemical Company Limited is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules

Our factory


Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules
Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules

Our certifications

Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules

Exhibitions

Low Price Poe Dispersant White Plastic Pellets mAh Grafted Plastic Granules Our advantages

1.Research & Development strength.
2.Quality assurance.
3.Product customized.
4.Lower costs and more convenient cross-boarder trader.
5.Delivery on time and global service.
 
 

 

Plastic Auxiliary Agent

SUPERAUTO.CAT, 2023