Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy

Model NO.
W1
Specification
20 KGs per bag
Origin
China
HS Code
3901909000
Production Capacity
50000 Tons/Year
Reference Price
$ 4.05 - 4.50
Contact Us

Product Description

Product Description

POE-g-MAH W1  is an internal antistatic agent widely used to polyolefin plastics such as PE, PP containers, drums (bags ) , ( boxes), polypropylene spinning, non-woven fabrics. This product has good heat resistance, anti-static effect durable and
efficient.
  POE-g-MAH W1  can be added into plastic products directly, and can also be prepared to antistatic masterbatch to combine with blank
resin can get a better effect and homogeneity.
 

Product Parameters
Product models W1  
Melting index _____  
Grafting rate high  
density 0.88g/cm ³  
performance PA Reinforced filling, low temperature toughening  
Typical application(advantages) Application:
  1. Used for nylon. Processing, reduce water absorption
  2. Used for Used as compatibilizer for nylon, polypropylene and polyethylene mixed alloy
  3. Uese Used for PA6/PA66 compatibility, toughening, etc.  Improve the impact resistance of d for  nylon macromolecular modifier (coupling agent) for mineral and glass fiber filling
 
Applied areas Ski board, nylon cable tie  
  NOTE: The above data are typical test values and should not be interpreted as a specification low < 0.4wt %, medium 0.4-0.8 wt%, high > 0.8wt%
Other products of POE-g-MAH series List
B rand number
  		Melt index
190 ºC  2.16kg
g/min 		Grafting rat io
  		Density
g/cm² 		C haracteristic
 
W1A 0.3-1.0 High 0.87 PA Reinforced filling, ultra-low temperature toughening
 
W1A-2 0.3-1.0 High 0.87 PA Reinforced filling, ultra-low temperature toughening
 
W1A-4 0.1-1.0 High 0.87 PA Reinforced filling, ultra-low temperature toughening
 
W1A-6 >0.1 High 0.89 PA Reinforced filling, low temperature toughening
 
W1A-F 5-14 High 0.87 PA Reinforced filling , TPE coated rubber
W1B 0.3-2.0 High 0.87 PA Reinforced filling, ultra-low temperature toughening
 
W1 0.2-1.0 High 0.88 PA Reinforced filling, low temperature toughening
 
W1C 0.3-1.5 Medium 0.88 PA Reinforced filling, low temperature toughening
 
W1D 0.6-2.0 High 0.88 PA Reinforced filling, low temperature toughening
 
W1F 10-24 High 0.87 PA PA enhanced filling, high dispersion
 
Comparison parameters of different applications
Table1:Typical Data of Toughening of PA6 Resin

Test raw material: PA6 (YH800) Test equipment: 35 twin screw extruder granulator
 
Performance Unit PA6 PA6+15%W1A PA6+20%W1A
Tensile strength MPa 60 55 50
Flexural strength MPa 90 8 5 75
Lzod notched impact strength (23 ºC ) J/m 80 6 5 0 90 0

Table2:Typical Data of Toughening of PA66 Resin
Test raw material: PA6 (YH800) Test equipment: 35 twin screw extruder granulator
Performance Unit PA66 PA66+15%W1A PA66+20%W1A
Tensile strength MPa 75 60 55
Flexural strength MPa 102 70 65
Lzod notched impact strength (23 ºC ) J/m 80 50 0 880

Table 3 PA6+GF  
test raw materials: PA6 (YH800), glass fiber (Jushi 988A); Test equipment: 35 twin screw extruder granulator
 
Performance Unit PA6 PA6+30%GF+6%W1
Tensile strength MPa 60 135
Flexural strength MPa 90 190
Lzod notched impact strength (23 ºC ) J/m 80 220

Table 4 PA66+GF
test raw materials: PA66 (ERP27), glass fiber (Jushi 988A); Test equipment: 35 twin screw extruder granulator
 
Performance Unit PA66 PA66+25%GF+8%W1
Tensile strength MPa 75 150
Flexural strength MPa 102 215
Lzod notched impact strength (23 ºC ) J/m 80 200
Packaging & Storage

Suggested dose: The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.

Packaging, storage and transportation:  20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.

Detailed Photos

Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy

 

Application display

Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy

Product produce process

 

Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy
Company Profile

Coace Chemical Company Limited is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.

For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
Our   factory
Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy Our certifications
Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy
Exhibitions
Impact Modifier for Nylon PA6/PA66/PA/PE, PA/PP Alloy
Our advantages
  1. Research & Development strength
  2. Quality assurance
  3. Product customized
  4. Lower costs and more convenient cross-boarder trader
  5. Delivery on time and global service

 

 

Plastic Auxiliary Agent

SUPERAUTO.CAT, 2023