EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber

Model NO.
W1P
Specification
20 KGs per bag
Origin
China
HS Code
3901909000
Production Capacity
20000 Tons Per Year
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

Product description
W1P is a grafted polymer of MAH, and EPDM rubber is used as a collective material. It is mainly used in nylon modification. It has the high elastic modulus of rubber, fatigue resistance and aging resistance.
 
Product models W1 P W1 P -2
Melting index _____ 0.1-0.6
Grafting rate Middle High
density 0.87g/cm ³ 0.87g/cm ³
performance PA reinforced filling, ultra-low temperature toughening ,anti-aging, anti-fatigue PA reinforced filling, ultra-low temperature toughening ,anti-aging, anti-fatigue
Typical application(advantages) Application:
  1. 1. Polyolefin alloy compatibilizer
  2. 2.PA enhanced filling
  3. 3. Ultra-low temperature toughened PA
Application:
1.1. Polyolefin alloy compatibilizer
2.PA enhanced filling
3. Ultra-low temperature toughened PA
Applied areas Ski board, nylon cable tie Ski board, nylon cable tie
NOTE: The above data are typical test values and should not be interpreted as a specification low < 0.4wt %, medium 0.4-0.8 wt%, high > 0.8wt%.
 
Comparison para meters of different applications
 
Table1:Typical Data of Toughening of PA6 Resin
Performance Unit PA6 PA6+15%W1P PA6+20%W1P
Tensile strength MPa 60 55 50
Flexural strength MPa 90 80 70
Lzod notched impact strength (23 ºC ) J/m 80 700 1000
Note: The above data are typical experimental values, for reference only, the viscosity of PA6  is 2.8.
 
Table2:Typical Data of Toughening of PA66 Resin
Performance Unit PA66 PA66+15%W1P PA66+20%W1P
Tensile strength MPa 75 57 55
Flexural strength MPa 102 85 80
Lzod notched impact strength (23ºC) J/m 80 800 1000
Note: The above data are typical experimental values, for reference only, the viscosity of PA6 6   is 2. 7.

It can be seen from the above table that W1P in nylon can effectively improve the toughness of the product and achieve the effect of super toughness.

Suggested dose:
The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.

Packaging, storage and transportation:
20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.
 



Application display

EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber

Company profile
Coace Chemical Company Limited  is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber

Our factory


EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber
EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber

Our certifications

EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber

Exhibitions

EPDM Grafted with Gma Has a High Elastic Modulus Modifier of Rubber Our advantages

1.Research & Development strength.
2.Quality assurance.
3.Product customized.
4.Lower costs and more convenient cross-boarder trader.
5.Delivery on time and global service.
 
 

 

Plastic Auxiliary Agent

SUPERAUTO.CAT, 2023