Chemical Polyolefin Elastomer Grafted Gma Impact Modifier for PE Toughening PBT Pet PC

Characteristic:  This product is polyolefin elastomer grafted with glycidyl mathacrylate , which is especially suitable for the compatibilizer and toughener of polyester or polycarbonate materials.

Note: The  data   above are  all experimental typical   values ,   only for reference .

Recommended dosage:
The dose (3-10%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.

Pack ag ing and Storage:
20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.
cm3

Other POE-g- GMA  series List:

Note: The above data are typical values tested and should not be construed as specifications
Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %

Coace Chemical Company Limited  is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.

1. Research & Development strength
2. Quality assurance
3. Product customized
4. Lower costs and more convenient cross-boarder trader
5. Delivery on time and global service