Cheapest Bp-1 Degradable Plastic Modifier Completely Dissolves Pbat/PLA Composites
Model NO.
BP-1
Specification
20 KGs per bag
Trademark
Colebond
Origin
China
HS Code
3901909000
Production Capacity
20000 Tons Per Year
Reference Price
$ 0.81 - 0.90
Description
Product Description
BP-1 is an anhydride modified biodegradable polyester elastomer.
USE : Compatibilizers For PLA,PBAT with starch,bamboo powder,inorganic mineral powder.
Product information :
Disclaimer:
The information contained herein is based on material, information and data available as of the end of December 2023. No warranty is given for any of data or evaluation results contained herein. It is also assumed that the product is to be used under normal conditions and with due precautions. If the product is to be used in any special manner, the user is requested safety measures to meet such new use or application.
Applications :
In addition to being biodegradable and recyclable, polylactic acid products also have the advantages of gloss, transparency, hand feel and heat resistance. Polylactic acid (PLA) also has certain antibacterial properties, flame retardancy and UV resistance. , so it has a wide range of uses and can be used as tableware, packaging materials, fibers and nonwovens.
Typical application
1. PBAT/PLA composite material
2. PBAT/PLA/filler
Note: The above data are typical values tested and should not be construed as specification Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %
Suggested dose:
3-10%, It can be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.
Packaging, storage and transportation:
20kg kraft bag with internal plastic bag . This product shall be treated as non- hazardous article and be store d or transport ed under dry conditions, and sunlight and rain shall be avoided.
Application display
USE : Compatibilizers For PLA,PBAT with starch,bamboo powder,inorganic mineral powder.
Product information :
| Typical Properties | ||
| Physical | Nominal Values | Test Method(s) |
| Density | 1.21g/cm3 | ASTM D792 |
| Melting Point(DSC) | 121 ºC (249.8°F) | ASTM D3418 |
| MAH content | High | Internal Method |
| Appearance | Pellet | |
Disclaimer:
The information contained herein is based on material, information and data available as of the end of December 2023. No warranty is given for any of data or evaluation results contained herein. It is also assumed that the product is to be used under normal conditions and with due precautions. If the product is to be used in any special manner, the user is requested safety measures to meet such new use or application.
Applications :
In addition to being biodegradable and recyclable, polylactic acid products also have the advantages of gloss, transparency, hand feel and heat resistance. Polylactic acid (PLA) also has certain antibacterial properties, flame retardancy and UV resistance. , so it has a wide range of uses and can be used as tableware, packaging materials, fibers and nonwovens.
Typical application
1. PBAT/PLA composite material
2. PBAT/PLA/filler
| Grade | Grafting rate | density/cm3 | Features |
| BP-1 | High | 1.21 | Degradable material compatibilizer, fully degradable by itself |
Suggested dose:
3-10%, It can be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.
Packaging, storage and transportation:
20kg kraft bag with internal plastic bag . This product shall be treated as non- hazardous article and be store d or transport ed under dry conditions, and sunlight and rain shall be avoided.
Application display
Company profile
Coace Chemical Company Limited
is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
Our factory
Our certifications
Exhibitions
Our advantages
1.Research & Development strength.
2.Quality assurance.
3.Product customized.
4.Lower costs and more convenient cross-boarder trader.
5.Delivery on time and global service.
Plastic Auxiliary Agent
-
A490 2205 Plain Stainless Steel Big Size M20 M24 M27 Heavy Hex Head Bolts and Nuts
USA Kds New Royal Front Loader 4 Wheel Electric Forklift
Inox Brush Finish Stainless Steel Sheet S31653 with Factory Price
OEM ODM Hot Selling Plush Sitting Animal Toy Cute Fluffy Plush Blue Owl En71 Soft Stuffed Bird Owl Toy
Common Use Ironmongery Internal Satin Nickel Door Lockset for Bedroom
Cummins Diesel Engine MTA11-C for Construction Equipment
DS-195L dispersing agent/Grinding Auxiliary/pigment dispersant
Foton Auman/Aumark Truck Cummins Weichai Wd12 /Wp10 Engine Gearbox Fast Truck Alex Cabin Spare Parts Clutch Booster Cylinder
Hydraulic Guillotine Shearing Machine Ras-30*2500 Ce and ISO9001
75W 48VDC 1.6A Constant Voltage Waterproof Switching Mode Power Supply
Passenger Car 02 Snow Wheel Winter Steel Wheel Rim
High M. W and Low Cationic Charge CPAM Cationic Flocculant for Sludge Dewatering
Needle Roller Bearings Rna Series
Poly Aluminum Chloride for Drinking Water
High Viscosity Anionic Polyacrylamide Polymer /Apam/ PHPA for Drilling Fluid/Bored Pilling
A25 Polyurea Sprayer Polyurethane Spray Machine Waterproof Coating Polyurea Spray Machine CE Approved
SUPERAUTO.CAT, 2023