B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber

Model NO.
B1A
Specification
20 KGs per bag
Origin
China
HS Code
3901909000
Production Capacity
20000 Tons Per Year
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

B1A is a chemically polypropylene with high content of MAH. Grafted MAH brings polarity to base polymer and outstanding bond character on different fillers, such as glass fiber, mineral filler or natural fibres.

It could be used as compatibilizer for Polypropylene and Polyamide to make PP/PA blends. It could also be used as a coupling agent for glass fiber reinforced Polypropylene, or called PP/GF composites. The high MFR of B1A could ensure the coupling agent with a good fluidity during the process in twin-screw extruder.
Product Appearance Melt index
(190 ºC ,2.16kg ):g/10min 		Grafting ratio Density(g/ cm3 )
B1A
  		White or light yellow even granules 50-80 High 0.92
Characterisitic
Features: This produce is propene polymer with functionalized MAH,which is especially suitable for the reinforcing and compatibilizing of PP mineral fiber and glass fiber.
Application:
1.Be used as the PP interface modifier for glass fiber reinforcing and mineral filling to increase the tensile strenth and bending strength ;
2.Be used as PA/PP or PA/PE alloy compatibilizer ;
3 . It can be used as a compatibilizer between inorganic reinforcing materials (glass fiber) and filling materials (calcium carbonate, talc, etc.) and PP;
4 . Can be used as PP extrusion sheet / plate surface improver, can effectively improve the material surface level up degree, eliminate material surface concave and convex and pitting;
5 . Can be used as a compatibilizer for PP / nylon alloy;
6 . Can be used as wood-plastic compatibilizer;
7 . It can be used to improve the adhesion of PP to polar materials (metal, nylon, etc.).
 
Table1:Typical Data of Reinforcing of PP Glass Fiber
 
Performance Unit PP+30%GF PP+30%GF+5%B1A
Tensile strength MPa 45 85
Flexual strength MPa 70 135
Lzod notched impact strength (23 ºC ) J/m 60 120
 
Table2:Typical Data of Reinforcing of PP Mineral Fiber
Performance Unit PP+TD20% PP+TD20%+3%B1A
Tensile strength MPa 28 35
Flexual strength MPa 50 60
Lzod notched impact strength (23 ºC ) J/m 50 36
Note:  The data   above are  all experimental typical   values ,   only for reference .

Suggested dose: The dose  ( 3-10% ) may  be increased or decreased  properly  according to the toughness requirements  and by taking t he cost into consideration.

Packaging, storage and transportation: 20kg kraft bag with   internal  plastic bag . This product shall be treated as  non- hazardous article and be store d   or transport ed under dry conditions, and  sunlight and rain shall be avoided.
 
Application display
 
B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber

B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber
 

Principle


When the MAH group meets the amino molecule, the ring molecular chain of MAH will break into amino molecule and form water molecule. This reaction links the molecular chain of MAH to the glass fiber, so it plays a compatible role.
B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber

Effect diagram of compatibilizer and glass fiber before and after reaction

B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber
Physical data

The data comes from the average value of the product sample in half a year, which is updated every six months. The standard of graft ratio was lower than 0.4%; 0.4% -0.8%; High ≥ 0.8%.

Test item Test data Test method
Density 0.92 g/cm³ ASTM D792  ISO 1183
Melt index 80-110(190ºC,2.16kg)g/10min ASTM D1238  ISO 1133
Grafting ratio High Acid-base titration
Appearance Granules  


Company profile
Coace Chemical Company Limited is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.
B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber

Our factory


B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber
B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber

Our certifications

B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber

Exhibitions

B1a PP-G-mAh/PP Grafted with mAh as Compatibilizer Impact Modifier for Polypropylene Glass/Mineral Fiber Our advantages

1.Research & Development strength.
2.Quality assurance.
3.Product customized.
4.Lower costs and more convenient cross-boarder trader.
5.Delivery on time and global service.
 
 

 

Plastic Auxiliary Agent

SUPERAUTO.CAT, 2023