High Precision Laser Range Finder

Model NO.
OEM
Specification
as required
Trademark
as required
Origin
Chengdu
Production Capacity
50000 PCS / Year
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

 

High Precision Laser Range Finder

 

Laser rangefinder 0310    

 
  • Single ranging and continuous ranging;uous ranging;
  • Distance gating, front and rear targets indication;
  • Function of self-testing   
  • Product description: The rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.


Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.
Precautions:
 - Although the 1535nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
- his distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
- How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the 
targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
Technical Parameter:
Ranging Parameters
Visibility under all sight   conditions Not less than 5km
For vehicle (2.3m×2.3m) targets,   diffuse reflectance ≥0.3
Humidity ≤80%
Ranging distance ≥3km
Functioning Parameters
Wavelength 1535nm±5nm
Laser divergence angle ≤0.5mrad
Continuous ranging frequency 1~10Hz adjustable
Ranging accuracy ≤±1m ( RMS )
Accuracy rate ≥98%
Minimum measuring range ≤50m
Ranging resolution ≤50m
Voltage DC9V ~ 36V
Weight ≤55g
Power Average power consumption   ≤1.5W,
peak power consumption ≤5W
Sizes ≤≤51.5mm×26mm×41.5mm
Operating temperature -40ºC ~ +65ºC
Storage temperature -55ºC ~ +70ºC
Communication interface: RS422, 115200bps
8P socket wiring definition :
No. Definition Color Remark
1 RS422 RX+ Brown RS422 receiving+
2 RS422 RX- Blue RS422 receiving-
3 RS422 TX- Yellow RS422 transmission-
4 RS422 TX+ Purple RS422 sending+
5 GND White Communication interface ground
6 +12V Red Powered by
7 GND Black Power supply ground
8 null Green null
- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other. High Precision Laser Range Finder

Laser rangefinder  0410   

 
  • Single ranging and continuous ranging;uous ranging;
  • Distance gating, front and rear targets indication;
  • Function of self-testing
  • Product description: The rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.


Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.
Precautions:
 - Although the 1535nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
 - This distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
 - How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
  Technical Parameters:
Ranging Parameters
Visibility   under all sight conditions Not less than 6km
For vehicle   (2.3m × 2.3m) target, diffuse reflectance ≥0.3
humidity ≤80%
Ranging   distance ≥4km
Functioning Parameters
wavelength 1535nm±5nm
Laser   divergence angle ≤0.5mrad
Continuous   ranging frequency 1~10Hz adjustable
Ranging   accuracy ≤±1m ( RMS )
Accuracy   rate ≥98%
Minimum   measuring range ≤50m
Ranging   resolution ≤50m
Voltage DC9V ~ 36V
Weight ≤70g
Power Average power consumption   ≤1.5W, peak power consumption ≤5W
Sizes ≤≤67mm×44.5mm×36mm
Operating   temperature -40ºC ~ +65ºC
Storage   temperature -55ºC ~ +70ºC
Communication   interface RS422,   115200bps
8P socket wiring definition:
No. Definition Color Remark
1 RS422 RX+ Brown RS422   receiving+
2 RS422 RX- Blue RS422   receiving-
3 RS422 TX- yellow RS422   transmission-
4 RS422 TX+ Purple RS422   sending+
5 GND White Communication   interface ground
6 +12V Red Powered by
7 GND Black Power supply   ground
8 null Green null
- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other. High Precision Laser Range Finder

Laser rangefinder   0610   

 
  • Single ranging and continuous ranging;uous ranging;
  • Distance gating, front and rear targets indication;
  • Function of self-testing
  • Product description: The rangefinders in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.


Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.
Precautions:
 - Although the 1535nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
 - This distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
 - How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
Technical Parameters:
Ranging Parameters
Visibility under all sight conditions Not less than 10km
For vehicle (2.3m×2.3m) target,   diffuse reflectance ≥0.3
Humidity ≤80%
Ranging distance ≥6km
Functioning Parameters
Wavelength 1535nm±5nm
Laser divergence angle ≤0.5mrad
Continuous ranging frequency 1~10Hz adjustable
Ranging accuracy ≤±2m ( RMS )
Accuracy rate ≥98%
Minimum measuring range ≤50m
Ranging resolution ≤50m
Voltage DC9V ~ 36V
Weight ≤120g
Power Average power consumption   ≤1.5W, peak power consumption ≤5W
Size ≤70.5mm×60mm×46mm
Operating temperature -40ºC ~ +65ºC
Storage temperature -55ºC ~ +70ºC
Communication   interface RS422,   115200bps
8P socket wiring definition:
No. Definition Color Remark
1 RS422 RX+ Brown RS422 receiving+
2 RS422 RX- Blue RS422 receiving-
3 RS422 TX- Yellow RS422 transmission-
4 RS422 TX+ Purple RS422 sending+
5 GND White Communication interface ground
6 +12V Red Powered by
7 GND Black Power supply ground
8 null Green null
- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other.





High Precision Laser Range Finder
 

Laser rangefinder    1010  

 
  • Single ranging and continuous ranging;uous ranging;
  • Distance gating, front and rear targets indication;
  • Function of self-testing  
  • Product description: The rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the upper computer through serial communication.

Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.
Precautions:
 - Although the 1535nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
 - This distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
 - How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
Technical Parameters:
Ranging Parameters
Visibility under all sight   conditions Not less than 15km
For vehicle (2.3m×2.3m) target,   diffuse reflectance ≥0.3
humidity ≤80%
Ranging distance ≥10km
Functioning Parameters
wavelength 1535nm±5nm
Laser divergence angle ≤0.3mrad
Continuous ranging frequency 1~10Hz adjustable
Ranging accuracy ≤±3m ( RMS )
Accuracy rate ≥98%
Minimum measuring range ≤50m
Ranging resolution ≤50m
Voltage DC9V ~ 36V
Weight ≤220g
Power Average power consumption   ≤1.5W, peak power consumption ≤5W
Size ≤100mm×60mm×70mm
Operating temperature -40ºC ~ +65ºC
Storage temperature -55ºC ~ +70ºC
Communication   interface RS422,   115200bps
8P socket wiring definition:
No. Definition Color Remark
1 RS422 RX+ Brown RS422 receiving+
2 RS422 RX- Blue RS422 receiving-
3 RS422 TX- yellow RS422 transmission-
4 RS422 TX+ purple RS422 sending+
5 GND White Communication interface ground
6 +12V Red Powered by
7 GND black Power supply ground
8 null green null
- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other. High Precision Laser Range Finder

Laser rangefinder   1505   

 
  • Single ranging and continuous ranging;uous ranging;
  • Distance gating, front and rear targets indication;
  • Function of self-testing  
  • Product description: The rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.

Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the upper computer through serial communication.
Precautions:
 - Although the 1570nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
 - This distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
 - How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
Technical Parameters:
Ranging Parameters
Visibility under all sight   conditions Not less than 15km
For vehicle (2.3m×2.3m) target,   diffuse reflectance ≥0.3
humidity ≤80%
Ranging distance ≥10km
Functioning Parameters
wavelength 1570nm±5nm
Laser divergence angle ≤0.3mrad
Continuous ranging frequency 1~10Hz adjustable
Ranging accuracy ≤±3m ( RMS )
Accuracy rate ≥98%
Minimum measuring range ≤50m
Ranging resolution ≤50m
Voltage DC9V ~ 36V
Weight ≤220g
Power Average power consumption   ≤1.5W, peak power consumption ≤5W
Size ≤100mm×60mm×70mm
Operating temperature -40ºC ~ +65ºC
Storage temperature -55ºC ~ +70ºC
Communication   interface RS422,   115200bps
-  The micro-moment connector J30J electrical interfaces as following,
No. Definitions Remarks
1 DC power supply  DC   +28V
2
3
4
5 DC power ground     DC +28V ground
6
7
8
9 Serial port T+   (laser rangefinder to platform+) RS422
10 Serial port R- ( Platform to laser   rangefinder- )
11 Serial port T- ( laser rangefinder to platform   - )
12 Serial port R+ ( Platform to laser rangefinder   + )
13 RS422   Telecommunication GND
14 SYN+ RS422 differential external time system, width> 10us.
15 SYN-

- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other. High Precision Laser Range Finder

Laser Rangefinder   2005   

 
  • Single ranging and continuous ranging;uous ranging;
  • Distance gating, front and rear targets indication;
  • Function of self-testing  
  • Product description: The rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.

Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.
Precautions:
 - Although the 1570nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
 - This distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
 - How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
Technical Parameters:
Ranging Parameters
Visibility under all sight   conditions Not less than 15km
For vehicle (2.3m×2.3m) target,   diffuse reflectance ≥0.3
humidity ≤80%
Ranging distance ≥20km
Functioning Parameters
wavelength 1570nm±5nm
Laser divergence angle ≤1mrad
Continuous ranging frequency 1~5Hz adjustable
Ranging accuracy ≤±3m ( RMS )
Accuracy rate ≥98%
Minimum measuring range ≤200m
Ranging resolution ≤50m
Voltage DC18V ~ 36V
Weight ≤1800g
Power Average power consumption ≤50W,   peak power consumption ≤100W
Size ≤100mm×60mm×70mm
Operating temperature -40ºC ~ +65ºC
Storage temperature -55ºC ~ +70ºC
Telecommunication   interface RS422,   115200bps
The micro-moment connector J30J electrical interfaces as following,
No. Definitions Remarks
1 DC power supply  DC   +28V
2
3
4
5 DC power ground     DC +28V ground
6
7
8
9 Serial port T+   (laser rangefinder to platform+) RS422
10 Serial port R- ( Platform to laser   rangefinder- )
11 Serial port T- ( laser rangefinder to platform   - )
12 Serial port R+ ( Platform to laser rangefinder   + )
13 RS422   Telecommunication GND
14 SYN+ RS422 differential external time system, width> 10us.
15 SYN-
- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other.

Laser rangefinder   3005   

 
  • Single ranging and continuous ranging;uous ranging;
  • Concentrations: 0.25cm³~3cm³
  • Function of self-testing  
  • Product description: The rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.


Composed of laser, transmitting optical system, receiving optical system and control circuit, the rangefinder in a pod photoelectric system shooting eye-safe laser rays can measure distance of targets and send results to the host computer through serial communication.
Precautions:
 - Although the 1064nm laser rays shot by the rangefinders are safe for human eyes, direct exposure is not advised;
 - Block the receiving lens when adjusting the parallelism of the optical axis, otherwise the detector will be permanently damaged due to excessive echo;
 -  This distance measuring module is not airtight, so you must ensure that the relative humidity of the operating environment is less than 80%, and ensures that the operating environment is clean and sanitary to avoid damage to the laser;
 -  How far the rangefinders shoot depends on the visibility of the atmosphere and the nature of targets. The range of measuring will become surely smaller when the atmosphere is foggy, rainy and sandy. For targets such as green leaf clusters, white walls, and exposed limestone with good reflectivity the range of measuring will be larger. Furthermore, with the inclination angle of the targets to the laser beam increases, the range of measuring will decrease;
.- Don't shoot at strong reflective targets such as glass and white walls within 50 meters to avoid too strong echoes which may damage the APD detector;
 - Don't move the plug of cables when the power is on;
 - Ensure the polarity of the power supply connected correctly, otherwise it will cause permanent damages to the equipment;
Technical Parameters:
Ranging Parameters
Visibility under all sight   conditions Not less than 15km
For vehicle (2.3m×2.3m) target,   diffuse reflectance ≥0.3
humidity ≤80%
Ranging distance ≥30km
Functioning Parameters
wavelength 1064nm±5nm
Laser divergence angle ≤0.5mrad
Continuous ranging frequency 1~5Hz adjustable
Ranging accuracy ≤±5m ( RMS )
Accuracy rate ≥98%
Minimum measuring range ≤400m
Ranging resolution ≤50m
Voltage DC18V ~ 36V
Weight ≤3200g
Power Average power consumption ≤200W,   peak power consumption ≤300W
Size ≤200mm×200mm×85mm
Operating temperature -40 ºC~ +65 ºC
Storage temperature -55 ºC~ +70 ºC
Telecommunication   interface RS422,   115200bps
The micro-moment connector J30J electrical interfaces as following,
No. Definitions Remarks
1 DC power supply  DC   +28V
2
3
4
5 DC power ground     DC +28V ground
6
7
8
9 Serial port T+   (laser rangefinder to platform+) RS422
10 Serial port R- ( Platform to laser   rangefinder- )
11 Serial port T- ( laser rangefinder to platform    - )
12 Serial port R+ ( Platform to laser rangefinder    + )
13 RS422   Telecommunication GND
14 SYN+ RS422 differential external time system, width> 10us.
15 SYN-
- The ground wire of the power supply, the communication interface, and the housing are electrically isolated from each other.

 

 

Rangefinder

COMICGENESIS.COM, 2023